[Q&A] What is the difference between latex gloves and rubber gloves?

Q: What is the difference between latex gloves and rubber gloves?

A: The difference between latex gloves and rubber gloves: 1, rubber gloves are made of dry rubber, latex gloves are made of latex. 2, latex gloves is a kind of gloves, it is different from the general gloves, processed by latex. Can be used as a home, industry, medical, beauty and other industries, is an essential hand protective equipment. The latex gloves that are made of natural latex and processed with other fine auxiliaries have a special surface treatment and are comfortable to wear. They are widely used in industrial and agricultural production, medical treatment and daily life. 3, rubber gloves, is a type of glove made of rubber sheet or film. Divided by the use of acid-base gloves, electrical insulating gloves, radiation gloves, medical gloves. According to rubber raw materials or manufacturing processes, latex gloves, molded gloves, etc.

40W Glue Guns Features:


1. Versatile

2. Easy

3. Quick

4. Proective Nozzle Cover

5. Trigger Flow Control

6. Bonds instantly

7. High quality

8. High temperature or low temperature

9. New design

10. With switch function

11. Big power

12. Industrial use


Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.


Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.

General Safety Information:

1. Check if the plug cord was in good condition, and if there is stand before plug into the electrical outlet ; Check if the used glue gun has glue flow through back of the tunnel;

2. wait 5-10 minutes to allow glue to soften, stand up the glue gun on the table when not in use;

3. Touch nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop the nozzle;

4. If the glue could not flow from the nozzle when the glue gun start to work, check if the glue gun are heating;

If glue gun can not be heated, there are following reasons:
1 Plug cord into electrical outlet not properly;
2 Glue gun has been destroyed owing to inner cord short circuit;

If glue gun can be heated, there are following reasons: Nozzle has been stopped by any impurity, ask careerman to manage it.

5. Do not use the glue gun under moist climate, humidity will affect insulation and cause electric shock;

6. Do not touch the nozzle or melted glue;

7. Do not remove out the melted glue stick from the tunnel back side, it will damaged the glue gun as well as scalding person hands.

8. Do not to disassemble or assemble any glue gun accessories freely, it will cause glue gun do not work properly;

9. Keep out of reach of children and stocked it beyond any of Children palpable side;

10. Only used for melting glue stick, no other usage;

11. When in use, there are any glue flow back from tunnel, stop using immediately, wait for careerman clean the glue;

12. Close the power if the glue gun not in use after 15 minutes;


Using methods

1. Glue gun using voltage is 110-220V AC,50/60Hz;

2. Tip gun forward on stand and place a piece of cardboard under the nozzle

3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun

4. After power, wait for 5-10 minutes to allow glue to soften

After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug

Professional Glue Gun

Professional Glue Gun, 40W Glue Guns, Silicone Glue Gun, Hot Melt Glue Gun

Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com