Integrated ceiling decoration steps guide PVC ceiling decoration steps

Some people say that the ceiling is a kind of face project. Why do you describe the ceiling like this? Because the ceiling is not only practical, but also the aesthetics is very important. The decoration of a house ceiling is first of all the way to choose the ceiling. The next step is the important construction. Each type of ceiling has different construction steps. Although the difference is small, it is an unchangeable process. The following decoration network is Everyone brings the steps of integrated ceiling decoration and PVC ceiling decoration. Interested friends may wish to find out.


吊顶装修步骤


First, the integrated ceiling decoration steps


1, preparation tools

The so-called "grinding the knife does not mistake the woodworker", the tools before installation should be fully prepared.


2, check the elevation, ceiling four corners

If the tile is attached to the top, it is recommended to take a point 230-240cm above the ground on one side of the wall, fix the coincidence point on the other side of the wall with a transparent water pipe and then bounce the wire. After the position is determined, drill the hole with the diamond bit.


3, six screws will take up the weight of the entire integrated ceiling

Measure the size on the ceiling, screw the screw into the expansion tube, and ensure that the height of the sandwich between the ceiling and the roof is not less than 25cm (Note: the connection between the screw and the ceiling is the reference for the installation of the entire ceiling, the screw must be perpendicular to the ceiling, And fixed firmly, each screw must be kept parallel.


4, keel is the basis of the gusset and electrical installation

The main keel is connected with the large hanging piece, and the main keel is stuck on each big hanging piece, and the required main keel is selected according to the size of the space.


5, the triangle keel is connected to each other

Insert the connector into the fixed triangular keel first, then cut the other end of the connector into the desired length.


Second, PVC ceiling decoration steps


吊顶装修步骤


1, preparation tools

Steel tape measure, knife, impact drill, extended screw, glue, light steel keel, gusset plate for ceiling, cement nail.


2, confirm the ceiling height

Lines that draw the height of the ceiling along the wall are generally elastic. Then use a cement nail or glue to fix a rim of the keel along the wall.


3, eye on the roof

Choose the right location and use the impact drill to make a few eyes on the roof. Determined according to the size of the room. Hang the rod and then hang the main keel. There is a hook under the boom to fix the main keel.


4, the upper board

According to the size of the gusset, the distance is fixed to the dragon skeleton. It is enough to buckle the gusset plate on top. Leave the location where the lights are installed.


The decoration steps of PVC compared to the integrated ceiling are much simpler and easier to operate. Most of us learn this knowledge for practice. Most of it is to understand it. The real construction still needs to be completed by a professional construction team. I hope the above. The related introduction can bring you some help. If you want to know more exciting home improvement information, please continue to pay attention to the decoration home network.



More related wonderful reading:

What are the ceiling decoration of the room? Room ceiling decoration type introduction

How to decorate the ceiling of the house? Detailed explanation of the ceiling decoration process

American restaurant ceiling decoration features American restaurant ceiling features

Interior decoration ceiling design instructions indoor ceiling decoration materials

Integrated ceiling decoration method integrated ceiling decoration precautions

Formic Acid has strong reducing ability and is a by-product of coking. Adding Formic ACID is more effective than adding inorganic acids such as H2SO4 and HCL, because inorganic acids have only acidification effect, and formic acid can not only reduce the pH value of silage, but also inhibit Plant respiration and poor microbial fermentation.

Formic Acid

Formic Acid In Water,Formic Acid To Oxalic Acid,Acetic Acid To Formic Acid,Formic Acid And Acetic Acid

ZIBO JUNTU INTERNATIONAL TRADE CO.,LTD , https://www.juntuchem.com