China's machine tool industry development is basically oriented

In 2010, China's machine tool industry economic operation situation data was released recently. In 2010, China's machine tool industry showed a steady and rapid development momentum, and the fundamentals of the industry maintained a good trend. The industry has achieved certain results in terms of technological innovation and structural adjustment. During the “Twelfth Five-Year Plan” period, the machine tool industry will usher in a favorable opportunity to improve the development level of the industry. Enterprises should accelerate the transformation of technological innovation and development mode. High-speed growth of industrial output value At the press conference of the 12th China International Machine Tool Exhibition held on February 23, China Machine Tool Industry Association announced the relevant data of the economic operation situation of China's machine tool industry in 2010. The data shows that in 2010, China's machine tool industry achieved steady and rapid development. In 2010, the total industrial output value of China's machine tool industry continued to grow at a high speed, with a total industrial output value of 553.68 billion yuan, a year-on-year increase of 40.6%; product sales value of 543.44 billion yuan, an increase of 41.4%. According to the statistics of the China Machine Tool & Tool Industry Association on some key enterprises, in 2010, the year-on-year growth rate of product sales revenue of the machine tool industry continued to rise in the first half of the year, and there was a slight decline in July and November, and in December. Start to rebound. Wu Bolin, executive vice president of China Machine Tool Industry Association, said that from the overall situation of both ends of production and sales, the development of China's machine tool industry in 2010 is basically good, and the production and sales convergence is still good. However, it is expected that the growth rate of product sales revenue of the machine tool industry may slow down in the future. Therefore, machine tool enterprises should further pay close attention to changes in market demand, make products more marketable, avoid inventory increase, and tight capital chain, which affects the steady development of enterprises. Adjusting and optimizing product structure In 2010, China's machine tool exports totaled US$7.03 billion, a significant increase compared with the same period of the previous year, which was $100 million less than the highest in 2008. Among them, the monthly export value of machine tool tools increased at a high rate year-on-year, and the growth rate of metal processing machine tools was lower than that of machine tool products. Wu Bolin analyzed that the main reason for the sharp rebound in China's machine tool exports is that with the further recovery of the macro economy, the international market has shown signs of recovery, and the demand for machine tool products in emerging markets has grown rapidly; at the same time, the previous year The base is low, and the growth rate is also faster. From the perspective of imports, in 2010, China's imports of machine tools also showed a significant increase. Specifically, the monthly import value of machine tools is in a fast-rising channel; the unit price of imported CNC metalworking machine tools has dropped sharply year-on-year; the numerical control devices, machine tool fixtures, parts for metal forming machine tools, measuring tools and measuring instruments all have a significant increase in the number of imports. The import value increased year-on-year. "The characteristics of machine tool products in terms of import show that the current domestic machine tool products can not fully meet the domestic market demand." Wu Bolin analysis said that at present, China's market demand for machine tool products is still very large, but domestic enterprises can The key to grasping the market opportunity is whether the product quality is hard enough, whether the technical strength is strong enough, and whether the product can meet the customer's needs. This also shows that machine tool companies should accelerate structural adjustment as a long-term strategic focus. Wu Bolin said that although China's machine tool industry has made significant progress in technological innovation, product development and product structure adjustment in 2010, enterprises should further take technological innovation as a starting point, accelerate the pace of structural adjustment, and strive to achieve scale, The speed shifts to focus on quality and efficiency, speeds up the elimination of low-end resource-based and high-energy-consuming products, and strives to increase the added value of products, thereby improving the overall development level of the machine tool industry. Seize the opportunity to enhance the industry According to the prediction of China Machine Tool Industry Association, in 2011, China's machine tool industry will continue to maintain steady growth momentum, the industry's total industrial output value will still grow by more than 10%, but will not be higher than 2010 Year-on-year growth rate. Wu Bolin said that the industry will pay more attention to the quality of investment this year, rather than pursuing the scale of investment in fixed assets, so the growth rate will slow down. The reporter learned in the interview that during the "Twelfth Five-Year Plan" period, the machine tool industry will usher in a favorable opportunity for structural adjustment. Relevant experts believe that in the next few years or even longer, the downstream industry's aviation, aerospace, shipbuilding, electric power, energy, automotive, rail transit, high-speed railway and other fields will undergo extensive and deep structural adjustment. While bringing great opportunities to the machine tool industry, it will also provide newer and higher requirements for machine tool products in terms of accuracy, efficiency, reliability, energy conservation and environmental protection. For example, the aviation industry will demand more high-speed, precision, composite and multi-axis high-level machine tool products; the power industry will put forward new requirements for high-rigidity, high-torque, multi-coordinate heavy-duty machine tools and CNC tools and gauges; The industrial upgrading of the shipbuilding industry requires high-quality heavy-duty, ultra-heavy-duty machine tools and special processing equipment; the automotive industry will require a large number of production lines, flexible lines and special machine tools. Wu Bolin said that during the "Twelfth Five-Year Plan" period, the main goal of the machine tool industry was to take a big step toward the machine tool powerhouse, the industrial structure was significantly improved, and the product structure was significantly improved. In addition, the market share of CNC machine tools has increased significantly, reaching more than 70%, and the development mode of the industry has to change significantly. According to reports, in order to achieve this development goal, China's machine tool industry will focus on three major tasks: First, increase efforts to improve the competitiveness and industrialization of medium and high-end machine tool products. To improve the quality and manufacturing capacity, and to increase the research and development of numerical control systems and functional components, the machine tools must lay down practical solutions to deep technical problems, especially industrialization. The second is to promote the industrialization process of CNC systems and functional components. As a strategic demand resource, high-end CNC machine tools are important in status and must be self-contained to achieve sustainable development. The third is to strive to promote the transformation of the development of the machine tool industry. To cultivate a typical, can not be hard and soft, heavy single machine neglected the complete set, to have a good product, but also to train a group of comprehensive talents who understand the user's crafts and know their own products.

Other Pipe fittings

Melt Plastic Pipe Fitting,Pe Pipe Fitting,Frp Plastic Pipe Fitting,Plastic Pipe Fitting

Zhongyan Machinery Co., Ltd. , http://www.juhengflanges.com