Comparative analysis of the small coups in the dry and wet separation of the bathroom

The separation of wet and dry toilets is very important. The bathroom is originally a place with a lot of water vapor. It is not easy to clean the bathroom. It is easy for the toilet to slip. The safety accident is difficult to shield. At the same time, too much water vapor will damage the sanitary ware. Reduce the service life of sanitary ware. So dry and wet separation is very important for us, so how to achieve wet and dry separation? Let's take a look at it with Xiaobian!

1. A small area bathroom can set the dry area outside the bathroom.

Many small-sized decoration owners feel that their small-area bathroom can't achieve dry and wet partitions. In fact, this is because the owners did not think of a good partitioning method. We don't have to set the dry and wet areas in the bathroom. We can use The space outside the bathroom is used to set the dry area, of course, this should choose the right location. Generally speaking, the small-sized decoration owner can set the wash basin outside, and the toilet and shower or bathtub are placed in the bathroom, so that the wet and dry partition can be easily realized.

Second, set up the bathroom cabinet in the bathroom

Most owners are very worried about the cosmetics and shampoo and bathing products in the bathroom. These products are not only easy to get wet in the bathroom, but also make the bathroom look very messy, which makes people feel very untidy; to avoid this phenomenon The owner of the decoration can install the bathroom cabinet in the bathroom and put the bottles and cans in it. This will prevent the occurrence of moisture in the toiletries.

Third, install a shower door or shower curtain in the bathroom

In order to keep the bathroom clean and tidy, the decoration owners can set the shower and bathtub in one place, and then install a shower door or a curtain on the outside. The shower door can effectively block the steam and water droplets generated during the bath from entering the dry area; The installation of the shower curtain is relatively simple and saves money, but its blocking effect is worse than that of the shower door. It can only partially block the water droplets from entering the dry area, and can not effectively prevent the steam from entering the dry area, so the conditional decoration It is best for the owner to choose the shower door as a barrier to the wet and dry partition.

HHCMS-200 Carbon Molecular Sieve
CMS-200 is a new kind of non-polar adsorbent specially designed for extracting nitrogen-rich gas from air. It is suitable for separating nitrogen from air. It has a high adsorption capacity for oxygen and can separate nitrogen from air.
The most notable feature of the carbon molecular sieve is its high gas-producing efficiency, especially the preparation of nitrogen with a purity of less than 99.5%.

It is widely used in large air nitrogen making equipment.

Project parameters

The diameter of:1.0-1.3   1.3-1.5

Packing density:≥660kg/m³

The intensity of particle:≥95

Compressive strength abrasion:≤1%

The moisture content:≤0.5%

Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel

The adsorption time of test condition was 58s with an average pressure of 1-2s

Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;

Carbon Molecular Sieve HHCMS-200

Carbon Molecular Sieves CMS200,Molecular Sieve Application,Hhcms Carbon Molecular Sieve,Molecular Sieves Adsorption

Zhejiang Changxing Haihua Chemical Co.,Ltd. , https://www.zjcxhhcms.com