First, the production method There are basically two major categories, namely wet contact type and dry pressure forming. According to the characteristics of the process, there are hand lay-up, lamination, RTM, pultrusion, compression molding, and winding molding. Hand lay-up includes hand lay-up, bag press, spray, wet paste low pressure and moldless paste. There are currently four types of molding methods that are most used in the world. 1 hand paste method: the main countries used are Norway, Japan, the United Kingdom, Denmark and so on. Kenny hand paste products: FRP fan 2 injection method: the main countries used are Sweden, the United States, Norway and so on. 3 molding method: the main use of the country is Germany. 4RTM method (resin transfer molding): The main use countries are Europe and the United States, Japan. Also: filament winding method, pultrusion method and hot potting method. More than 90% of FRP products in China are produced by hand-paste method, and others have molding methods, winding methods, lamination methods, and the like. Japan’s hand-paste method still accounts for 50%. From the perspective of countries all over the world, the hand-paste method still accounts for a considerable proportion, indicating that it still has vitality. The hand paste method is characterized by molding with a wet resin, simple equipment, low cost, and an overall product capable of pasting 10 m or more at a time. The disadvantages are low mechanization, long production cycle and unstable quality. In recent years, China has introduced process equipment such as squeezing, spraying and winding from abroad. With the development of FRP industry, new methods will continue to emerge. Rubber Magnetic Tape,Shower Door Magnetic Strip,Permanent Magnetic Strip,Fridge Magnetic Strip Smart Magnet Co., Ltd. , http://www.tsmagnet.com
FRP production method