Sewage pump works

Sewage pump is a combination of pump and motor can work under the submerged pump products, sewage pump structure is relatively compact, small footprint, because it does not exist irrigation and other issues, so repair and install more general Pump is also relatively easy to use. Next, let's look at the working principle of the sewage pump. Sewage pump works: sewage pump seal oil chamber is equipped with high-precision anti-interference leakage detection sensor, and stator windings embedded in the thermal components, absolute protection of the pump motor. According to user needs with automatic safety control cabinet, the pump leakage, leakage, overload and over-temperature and other absolute protection, improve product safety and reliability. Float switch can be based on changes in liquid required to automatically control the pump start and stop, without special care, the use of extremely convenient. According to user needs with dual rail automatic coupling installation system, which brings great convenience to installation and maintenance, people do not have to enter the sewage pit for this purpose. Can be used in the whole head range, and to ensure that the motor will not be overloaded. Sewage pump has two different installation methods, fixed automatic coupling installation system, mobile free installation system. Sewage pump in the structure and performance of self-priming sewage pump, draw lessons from the advantages of similar products at home and abroad, and in many ways to absorb the user's requirements and provide improved advice, developed from the self-absorption and sewage in one, namely Like ordinary water self-priming pump does not need safety valve, do not lead irrigation, but also suction containing large solid block, long fiber dirt, sediment, waste ore impurities, excrement disposal and all engineering sewage and plastic Liquid. Automatic installation of the system through the coupling device, so that the pump in the installation and removal automatically connect or disconnect the piping system. WQ submersible sewage pump is an indispensable water treatment equipment. Its safe operation directly affects the safe operation of the entire water treatment system. Therefore, the most important issue in the WQ submersible sewage pump is to ensure the reliability of the pump. The key problem that affects the reliability of the sewage pump is the pump Sealing performance and no overload performance and life of important components in the pump seal, the use of a combination of impeller hydrodynamic seal and mechanical seal of the new sealing technology, the seal reliability has been greatly improved. Understand the sewage pump working principle, we know about the sewage pump further, in the operation should pay attention to the following aspects: When the voltage exceeds 10% of the rated voltage or less, can not start the pump; Note Check the running direction of the rotor, viewed from above should be counterclockwise.

Titanium Tube is light in quality, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as heat exchanger coil, heat exchanger, serpentine heat exchanger, condenser, evaporator and pipes etc. Many nuclear power industries use Titanium tube as the standard pipe for its unit.

Titanium Tube

Titanium Tube,Titanium Welded Tubes,Titanium Square Tube,Tensile Resistance Tube

SHIZUISHAN BT ALLOY CO.,LTD , https://www.szsbthj.com