All product information in the target model or product model in the industrial design can be output, from which all structural information and processing information can be obtained according to the purpose of the respective information. It is inferred that the future industrial design no longer needs assembly drawings or parts drawings, but it is currently impossible to achieve for three reasons: 1 The currently available 3D computer-aided design system cannot provide all the data needed to describe the product and manufacture the product. The preconditions for all acceptance can only be gradually achieved with the continuous improvement of the three-dimensional computer-aided system. 2 Not all internal or external operating ranges have the prerequisites required to directly apply the target model. 3 Due to the intuitiveness and target orientation control, some information can only be attached to the drawings. But in any case, the traditional part drawing as the only processing technical file will lose its meaning in a relatively short period of time, and this design form familiar to the designer will become a thing of the past. Future Models for Industrial Product Design The information model in most industrial designs currently provides only a description of the geometry. In the future, people will be making more comprehensive industrial product models. The nylon conveyor belt model is not only suitable for defining products processed in an effective state, but also to simulate the operation and use characteristics of the products. Here are some local models: 1 to study the motion model of rigid body dynamics in the rigid body assembly function; 2 to identify the dynamic model of deformation and pressure state under spring and attenuation characteristics; 3 to analyze the thermal expansion characteristics and heat load description temperature Model; 4 simulation model to identify corrosion and wear effects; 5 multi-action model used to describe the process to improve product quality. Industrial Design Product Modeling strives to describe all the features of the product as completely as possible. To achieve this goal faster and more economically, it is necessary to quickly develop inexpensive computers and memories, as well as unique and novel software. It is tempting to simulate the operation of a product and the life of each stage in advance to get a real product that is the same as the actual use. Garlic Press,Alpha Grillers Garlic Press,Orblue Garlic Press,Epicurean Garlic Press Fortary Industry&Trading Co., Ltd. , https://www.fortary.com
A motion model in the rigid body dynamics of rigid body assembly