What are the advantages and disadvantages of Sandalwood?

With the rapid development of society and economy, people are increasingly pursuing the quality of life, especially for home life, many friends have started to pursue solid wood furniture. In solid wood furniture, sandalwood furniture is considered a noble one, many have Certain economic strength friends will choose sandalwood furniture, although many of my friends chose sandal wood furniture, but do not know what advantages and disadvantages sandalwood home has , for us what are the advantages and disadvantages, today, Long Yao furniture Xiaobian give everyone Talk about the good and bad of ebony furniture .

advantage

As soon as it was buried in the ground, it could not be rotted for thousands of years. Therefore, the empress's coffin was made of ebony.

The second insect pest gold sandalwood has a scent of sandalwood, the ancient book records that its insects do not invade, sandalwood cabinets store clothing books and calligraphy can avoid insects, modern experiments prove that the test proves that sandalwood resists the corrosion of rot fungi, termites, and marine growth. Drilling wood animals are also eroding, so the royal bookcase bookcase is sandalwood.

In the third year, it is not cold in the house. Sandalwood is often used to make bed couches. It is not cold in winter, hot in summer, and does not hurt the body. Other hardwoods do not have such excellent characteristics.

The fourth is not easily deformable, rarely cracked, due to the smooth texture and not easily deformed, not only shrinkage and hardness in the nail holding force is quite good.

Its five lines are dense and beautiful, beautiful and exquisite. The ebony is soft and warm. The new cut wood surface is yellow and green, and when it is raining, Chen Chen fragrance is distributed. The utensils made by sandalwood do not have the feeling of a hard state, but they are beautifully shaped. Under the light, they emit golden light, but they are quiet and innocent, quiet and low-key.

Shortcomings

Because of the low yield, it is difficult to have high-quality tree species with uneven quality.

The second line and the annual ring are not clear and the visual effect is not fresh enough. The overall aesthetic appearance is not very good, especially the quality of sandalwood is even more obvious.

The third material is heavy and not easy to handle. It is easy to pick up in the handling process, and the overall aesthetic appearance is reduced.

Its four materials are hard, difficult to process, and prone to cracking.

Its five materials are greasy, easy to return oil at high temperatures. People have a feeling of greasy.

In general, the sandalwood furniture is very good in solid wood furniture, whether it is material, or production process, are the best in solid wood furniture, it is precisely because of these reasons, led to, the price of sandalwood furniture is high, Some of the more valuable sandalwood is priceless, there are no cities, here, we must remind the next friends, if you want to buy sandalwood furniture, it is best to go to some formal big market, so that the line of veterans to help you choose Otherwise, to buy some of the poor quality, falsification of sandalwood furniture will outweigh the benefit.

We may use these furniture for a lifetime and we must be careful when shopping! There is a real difference between fake sandalwood furniture and not only is it easily damaged, but it may also affect our health!

The above is about the advantages and disadvantages of sandalwood furniture related introduction, want to know more sandalwood furniture knowledge, please pay attention to go home furniture network, there is always what you want!

Cutting mode: Laser cutting

Suit material: carbon steel, alloy steel, galvanized plate, stainless steel, copper plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet matal.tube stock.

1.Product describe

Our company have both CO2 and Fiber laser machines. They can cut various type of metals such as aluminium, mild steel and stainless steel. Fiber laser machine can even cut brass and copper. These machines can cut various profiles with smooth and high quality surface finish.

Fast cutting spead, high working efficiency and high stability, it is a high-tech equipment that set one of fiber laser technology, CNC technology and high-tech equipment.

2. Product features

Imported with original packaging servo motor and reducer, bilateral drive, high operating speed and high precision.

Can remote operation, convenient and efficient, save labor.

Imported cutting head, optical glass, focusing is convenient and cutting perfect.

Fiber transmission, no need to adjusted the optical circuits, focal spot is more smaller.

Adopted auto lubrication system, auto dual-temperature control syatem, convenient and efficient.

High precision grinding guide rail, gear and rack, precision class up to ±0.02mm.

Metal Tube And Sheet Cutting Machine

Laser Tube Cutting Machine,Laser Iron Sheet Cutting Machine,Integrated Cnc Cutting Machine,Tube Sheet Integrated Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com