We often use glue in our lives. Flat sealants are one of them. Flat sealant may not be well understood by many people. It is a relatively common one-component, thixotropic viscosity, high-strength adhesive. Anaerobic flat sealant can be used for high-temperature work plane sealing and rigid structure close-fitting flange face seal. Today Xiaobian will introduce anaerobic flat sealant application methods, application points and applications. 　　 Anaerobic flat sealant application method 1. Remove grease, dust, and rust from the adhered surface, clean it with DB755 cleaning agent and dry it. 2. Open the plastic bottle cap and squeeze the glue liquid onto the cleaned surface. The glue should be sufficient to ensure that there is no shortage of glue. 3. Screw the thread and adjust the position before the initial solid. It is not suitable to loosen the thread after the initial solid. 4. Screw the thread into place and let it cure in the air. Can provide instant seal, to achieve maximum seal pressure requires curing 24h. 　　 Anaerobic flat sealant application points 1. Apply an uninterrupted circle when gluing 2. Tighten the flange bolts properly so that they do not move or move very much. 3, flange must do degreasing treatment 4. Do not apply anaerobic sealant to pre-cut gasket coating 　　 Anaerobic flat sealant High temperature resistance 200°C, resistant to media, good chemical resistance, good sealing, pressure resistance, heat resistance, corrosion resistance, heat-resistant expansion and contraction, good rigidity of the adhesive layer, rigid structural machine parts for high temperature work of plane sealing, Such as: automotive engine crankcase flat seal, cylinder head thermostat flat seal, cylinder head valve chamber flat seal, oil cooler flat seal, intake manifold flat seal. After reading the entire contents of the method, application points, and applications of the anaerobic flat sealant introduced by Xiao Bian, I believe we should have some understanding of the anaerobic flat sealant. The anaerobic flat sealant is widely used because it not only has an adhesive effect but also has a certain sealability and can be quickly used in production. 0 Anfeng Magnets Manufactruing Co.,Ltd , https://www.anfengmagnetics.com
Anaerobic flat sealant application methods, application points and uses