When using faucets in the home, it often happens that the faucet is broken with the use of the faucet, and the faucet cannot be closed. Even if it is closed as usual, it will still leak, especially on hot and cold faucets. In this case, what is the cause of the faucet flow? Generally due to the aging of the spool, then how to repair it? Now let's take a look at the faucet, and let's take a look at the faucet . What can I do if my faucet doesn't work? The reason why the faucet cannot be closed is that its valve core is aging or damaged. At this time, we choose to replace the valve core with the original faucet model. We can basically buy it in a hardware store or a faucet store. To. Then prepare tools for replacement of the valve plug, including a word or Phillips screwdriver, Allen wrench, needle nosed pliers, small blades, and so on. What can I do if the faucet doesn't hold up? The tools and spools are ready. Before the replacement, the water switch of this faucet needs to be turned off. The safest method is to turn off the entire household water inlet gate and avoid water spray after the faucet is removed. When you remove the cold water button or plastic cap, you can use a small blade to gently smash the button or plastic cap. What can I do if the faucet doesn't hold up? Open the hot and cold water button to see the screw inside, according to the specific shape of the screw, you can select the corresponding screwdriver, a word, cross flower, hexagon, Allen wrench, etc., a suitable screwdriver to the hole Remove the screw inside to remove the faucet handle. What can I do if the faucet doesn't hold up? Only after removing the faucet handle can you see the inside of the valve plug, and even some faucet valve plugs will have a fixed housing cover outside. This requires removing the housing cover to see the valve plug. The faucet valve core generally uses a clamp with four claws to fix the valve core. At this time, the two claws on both sides can be jammed with needle-nose pliers, and the clip can be removed by clockwise rotation. What can I do if my faucet doesn't hold up? 5. Install a new valve plug Only when the card is removed can the aged and damaged valve core be removed, and a new valve plug can be installed. Then the assembly can be installed one by one according to the previous removal process. After the handle is installed, the water source valve can be opened. Try to open the faucet and see if there is a leak. If there is no problem, install the remaining accessories. Editor's Summarize: The above is about how the faucet cannot be closed. How to do it is generally introduced. Simply replacing the valve core inside the faucet can solve this problem. Compared to replacing the faucet, replacing the valve plug is more economical. I hope the contents of Xiaobian can give you some help. If you want to learn more about the relevant information, you can pay attention to our website information. What if the faucet doesn't hold up? Steel Structure,Steel Structure Material Building,Steel Frame Structure Building,Prefabricated Structural Steel Building Foshan TianPuAn Building Materials Technology Co.,Ltd. , https://www.tpa-prefabhouse.com
What is the reason why the water flow is not stopped?